WHAT IS IT?
BYB Telemetry detects the motion of the suspension
and other dynamic parameters of your dirtbike while riding.
It allows to visualize the motion of the suspension,
in order to base the setting
on quantitative information instead of feelings.
HOW BYB TELEMETRY CAN IMPROVE YOUR PERFORMANCE?
Suspension technology has drastically evolved
in the last years, reaching an incredibly high standard
of quality and performance, but also complication level.
With more tuning parameter available on every suspension system, finding a proper suspension set-up is not a straightforward operation.
Every rider would like to have a perfectly balanced
and smooth bike on track.
In fact, an optimal set-up can make the difference concerning chronometric feedback and fatigue.
This is true for the professional, but also for the amateurs riders.
These are the benefits you will get when using data instead of feelings.
HOW BYB TELEMETRY WORKS?
Thanks to a set of universal supports,
BYB Telemetry can be easily installed on every MX bike
in only 15 minutes.
It's designed to be minimal on the bike and professional-grade.
You can start riding immediately
because no calibration is needed.
After your sessions, you can directly download
your runs to our software & app
in order to analyze the data
and get the best out of your bike!
SAY HELLO TO BYB TELEMETRY v2.0!
From now BYB v2.0 is professional and easier than ever!
We improved the accuracy, increase the sampling rate to 1000Hz, added new LEDs and new sensors in less of the same overall footprint!
SYSTEM MAIN FEATURES
Two different sampling mode
Sampling Rate (500 Hz and 1000 Hz)
Motorsport-grade fork and shock sensors
Bike-specific brakes and speed sensors
Built-in 3-axis accelerometer, gyroscope, and GPS
Shock at the handlebar detection
Extra-channel for custom applications
Long-lasting internal battery
SOFTWARE MAIN FEATURES
Wireless download to software and app
Runs history and library consultable any time
Deep analysys of suspension position and speed
Usefull and statistical metrics
Real rear-wheel leverage interpolation
Overall suspension and overall bike balance
High-intuitive charts to immediate understanding
Deep comparison between runs,
including time gain/loss
Life-time free updates
ELECTRONIC AQUISITION UNIT
Two different sampling mode
High sampling rate (500 or 1000 Hz)
On-board wireless connection technology
Built-in automotive-grade GPS
10 total channels
More than 10h of continuos sampling
Mountable on every handlebar 28mm
16 GB of available on-board space
Built-in inertial sensors
Made in Italy
Waterproof anodized alumiunm case
HIGH SAMPLING RATE
Guarantee a fast sampling rate is crucial for these task. That's why we designed this version as a real power-house.
The literature about road bike competition, which are characterized by lower shaft speeds, claimes that the minimum acceptable sampling rate is around 400Hz.
In high-impacts sports, such as mountain-bike, it's necessary to push this value more.
BYB offers 1000 Hz sampling rate for the best accuracy. It's possible to set the system to acquire also at 500Hz.
The calibration is totally automatic. It's required only a moment with both suspension fully extended during the run, for example a jump.
ADAPTABLE TO EVERY TRAVEL
The sensors that come inside the kit can be used with all fork below 350mm and shock absorbers below 150mm.
No additional calibration are required.
BYB detects the shock and the vibrations at the handlebar plus the spatial orientation of the bike.
The GPS is equipped with an external antenna in order to get a strong signal also inside the woods. Precise comparison needs an equally accurate GPS.
Standard fork lenght 350mm
Standard shock lenght 150mm
High accuracy technology
Motorsport grade sensors
Auto-alignament universal joints
IP65 sealing (with low actuation force)
Digital brakes sensors
Analog brakes sensors (optional)
Fast to install brakes sensor
Don't require to open the hydraulic circuit
Rear-wheel speed sensor (optional)
Front-wheel speed sensor
MOUNTINGS & HARDWARE
Fast and easy to use
Installable on every fork and shock
Specifically designed support for MX
The mountings that come alongside the kit are usable almost on every bike.
As every bike is different, if something doesn't fit, we will be happy to help you in order to make some custom-made support.
UNIVERSAL BETWEEN ALL THE DISCIPLINES (MX + MTB)
Install BYB on your dirtbike.
it's possible to get the data straight from you MTB too!
It's the same acquisition unit with a different bundle of sensors.
Visit the Mountaibike page to learn more
READY FOR THE FUTURE AND TO BE EXPANDIBLE
Fully compatible with future generation sensors
New upgrades availables at any time
Can handle ten channels max
Ready to be engineered for custom applications
For special needs or custom applications get in touch with us.
APP & SOFTWARE FEATURES
Get the best out of your bike by observing the charts inside the software.
Store your settings or add notes, and if you can't use your PC, feel free to use the official mobile application.
Almost every month is released a new version and all new updates and features are back-word compatibility and free, lifetime.
Visit the Software and App page to learn more
WHAT'S IN THE BOX?
Fork sensor (350 mm)
Shock sensor (150 mm)
Front brake digital sensor
Rear brake digital sensor
Front wheel speed sensors
Complete set of universal mountings and screws
Software with lifetime updates